Dash Board
  Barb Bases and Barb Arms
  Sort By: 
BARB BASE
Barbed wire arm bases are a cap or top used in combination with one or two barbed wire extension arms held in place by a bolt and nut. More Info BARB BASE
 
BARB WIRE EXTENSION ARMS
Three wire Z-slot barbed wire extension arms are made of pressed steel and used in combination with barbed wire base to hold three strands of barbed wire either vertically or angled at 45° in or out from the fence line. These arms are 14" long and 18 gauge. More Info BARB WIRE EXTENSION ARMS
 
HEAVY ONE PIECE PRESSED STEEL 45 ANGLE BARBED WIRE ARM
These are post fittings used to hold barbed wire in place. These arms are angled at 45° and hold three strands of barbed wire. These arms are foreign produced and are not rain-tight. More Info HEAVY ONE PIECE PRESSED STEEL 45 ANGLE BARBED WIRE ARM
 
T-POST ONE PIECE 45 ANGLE ARM
Designed to add height and 3 wire capability to any size T-Post 1.01 - 1.50 weight. Can be manufactured to fit on either side of T-Post. More Info T-POST ONE PIECE 45 ANGLE ARM
 
TOP MOUNT BARB ARM

These arms are 16" in length welded to a 3" x 3" x 1/4" plate and are designed to hold 3 strands of barb wire in place.  They are designed to be installed to the top of a post or top of a wall and are domestically produced.

More Info
TOP MOUNT BARB ARM
 
SIDE MOUNT BARB ARM

These arms are 18" in length welded to a 3" x 3" x 1/4" plate and are designed to hold 3 strands of barb wire in place.  They are designed to be installed to the side of a post or side of a wall and are domestically produced.

More Info
SIDE MOUNT BARB ARM
 
EXTRA HEAVY ONE PIECE 45 ANGLE BARB ARM
Designed to hold 3 strands of barb wire in place. These are domestically produced and meet 250 lb. downpull specs. More Info EXTRA HEAVY ONE PIECE 45 ANGLE BARB ARM
 
EXTRA HEAVY VERTICAL ONE PIECE ARM
Designed to hold 3 strands of barb wire in place. These are 14 1/2" overall measured from top of loop to tip of arm, and are domestically produced. More Info EXTRA HEAVY VERTICAL ONE PIECE ARM
 
EXTRA HEAVY V-TYPE ONE PIECE ARM
Designed to hold 6 strands of barb wire in place. These are domestically produced and meet 250 lb. downpull specs. More Info EXTRA HEAVY V-TYPE ONE PIECE ARM
 
PRESSED STEEL C-POST BARB ARMS
Pressed steel one piece 45° arm designed to fit C-Post, available in standard and heavy sizes. More Info PRESSED STEEL C-POST BARB ARMS
 
PRESSED STEEL C-POST VERTICAL BARB ARM
Designed for three strands of barb wire, avalible for standard or heavy C-Post. More Info PRESSED STEEL C-POST VERTICAL BARB ARM
 
PRESSED STEEL C-POST V-TYPE BARB ARM
One piece V-Type arm designed for standard or heavy C-Post, designed for six wire installation. More Info PRESSED STEEL C-POST V-TYPE BARB ARM
 
PRESSED STEEL BARBED WIRE CORNER ARM
Pressed steel barbed wire corner arms are a post fitting used to hold barbed wire in place. These arms are angled at 45° and hold three strands of barbed wire. More Info PRESSED STEEL BARBED WIRE CORNER ARM
 
PRESSED STEEL V-TYPE CORNER ARM
Pressed steel barbed wire V-Type corner arms are a post fitting used to hold barbed wire in place. These arms are "V" shaped and hold 6 strands of barbed wire. More Info PRESSED STEEL V-TYPE CORNER ARM
 
UNIVERSAL VERTICAL BARBED WIRE CORNER ARM
Universal vertical barbed wire corner arms are a post fitting used to hold barbed wire in place. These arms are universal because they fit post sizes 2 1/2" through 4 1/2". More Info UNIVERSAL VERTICAL BARBED WIRE CORNER ARM
 

Hearne Steel  |  ph 979-279-3464  |  fx 979-279-6529  |  Hearne, Texas  |  Email |  Site Map