Dash Board
  Fence Stretchers and Post Drivers
  Sort By: 
FABRIC TIES and HOG RINGS
Fabric ties designed to attach chain link to rail tubing. Steel ties are available in 12 gauge with different lengths. Aluminum ties are available in 9 gauge and 11 1/2 gauge with different lengths. Pig rings are 12 gauge steel and come in 10 lb. boxes. More Info FABRIC TIES and HOG RINGS
 
TENSION BAR
Galvanized steel bars designed to pull fabric tight and to attach to tension bands. Available for 4', 5', and 6 ft. heights. More Info TENSION BAR
 
BOLTS
Galvanized bolts used in all areas of fence construction. Also carry lags and J-bolts for hanging gates. Many different sizes of U-bolts also carried. More Info BOLTS
 
U-BOLT WITH HEX NUT and SQUARE U-BOLT WITH HEX NUT
More Info U-BOLT WITH HEX NUT and SQUARE U-BOLT WITH HEX NUT
 
FENCE STRETCHER AND PANEL STRETCHER
Stretchers designed for 2 3/8" and 2 7/8" tubing. These units facilitate installation of fabric to terminal post. More Info FENCE STRETCHER AND PANEL STRETCHER
 
STRETCHER BAR
These bars are designed to pull chain link fabric using a puller or come a-long. They are available in 30", 36", 42", and 68" sizes. Made from heavy guage galvanized steel. More Info STRETCHER BAR
 
T-POST DRIVER
Drivers designed to install T-Posts. Weight is approximately 22 lbs. A must to install T-Posts. More Info T-POST DRIVER
 
HOG RING PLIER
Specialized pliers designed to crush pig rings for easy installation. Made of heavy gauge steel with set screw to prevent over-crushing of rings. More Info HOG RING PLIER
 
GATE CLIP TOOL
Specialized tool used to install special gate clips easily. Made from heavy steel for commercial duty with black rubber grips. Will only work on 1 3/8" or 1 5/8" special gate clips. More Info GATE CLIP TOOL
 
V-GROOVE TRACK
V-Groove Tracks are used with V-Groove Wheels in the tracking of slide gates. It has a 1/4" x 5" strap with 1" x 1" x 1/4" angle welded to it and 9/16" holes every 1' (foot). It comes hot dipped galvanized. More Info V-GROOVE TRACK
 
CORRAL LOOP
Used to weld to pipe for running rail, either 1 5/8" or 1 7/8" size. 9 gauge material. More Info CORRAL LOOP
 
PERLIN CLAMP
12 ga. x 3/4" 2-peice strap steel clamp designed to join two pipe at 90° angles. Used mainly in the construction of greenhouses, but can also be used to build portable buildings and for many other uses. Stap steel which is twisted and galvanized, are sold without bolts. More Info PERLIN CLAMP
 

Hearne Steel  |  ph 979-279-3464  |  fx 979-279-6529  |  Hearne, Texas  |  Email |  Site Map