-
Line wood adaptor for 2 3/8" steel posts. Bracket is 13ga. X 2" X 6", and strap is 13ga. X 7/8". Designed to use 2 - 5/16" X 1 3/4" carriage bolts (not included). Bracket has 4 holes for rail attachment. Please see additional information below for further details
-
Dual Top Plate is used to cover the top of the post. Universal Post Plate bracket is used to attach two post together, which allows horizontal rail to run through the center of your posts. Please see additional information below for further details
-
11 gauge Square Line Rail Clamps are a two-piece clamp designed for 180° horizontal square rail connections to a square line post. Carriage bolt and nut sold separately. Please see additional information for further details
-
Kennel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 12 gauge x 1 1/2" wide steel with approximately 3/4" spacing between the two pieces of tubing. They are most commonly used for dog kennels and similar applications. Carriage bolt and nut sold separately. Please see additional information for further details
-
Thrust washer designed for Industrial 90º Hinges. These are made out of 11 ga. Steel and hot dip galvanized. Please see additional information for further details
-
Pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Hinge is attached to the post with a strap and four carriage bolts. Carriage bolts and nuts are included. Please see additional information for further details
-
Universal pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Universal box hinges are attached to the post with a strap and four 3/8" carriage bolts. These hinges are universal because they fit post sizes 2 1/2" through 4 1/2". Bolts and nuts included. Please see additional information below for further details
-
Designed for corral panels, uses 9" corral pin for attachment. Weld on style. 9 gauge. Please see additional information below for further details
-
Split kennel hinges are a fitting that one half of the hinge allows the kennel gate frame to swing while the other half attaches to the kennel panel. Two 3/8" x 1 1/2" carriage bolts and nuts are used. Carriage bolts and nuts are sold separately. 8 gauge x 1 1/2" material. Please see additional information below for further details
-
Walk gate sets are a package of all necessary parts to install a single walk gate. The components consist of: 2 - female gate hinges 1 - fork latch assembly 2 - male post hinges 4 - carriage bolts and nuts The J-bolt walk gate set comes with 2 - 5/8" x 4 1/2" J-bolts instead of 2 - male post hinges. All the components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
Walk gate sets are a package of all necessary parts to install a single walk gate. The components consist of: 2 - female gate hinges 1 - fork latch assembly 2 - male post hinges 4 - carriage bolts and nuts The J-bolt walk gate set comes with 2 - 5/8" x 4 1/2" J-bolts instead of 2 - male post hinges. All the components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
Double drive gate sets include a package of all necessary parts to install a double drive gate. The components consist of: 4- female gate hinges 2- drop rod guides 1- fork latch assembly 4- male post hinges 10- carriage bolts and nuts The J-bolt double drive gate set comes with 4- 5/8" x 4 1/2" J-bolts instead of 4-male post hinges. All components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
Double drive gate sets include a package of all necessary parts to install a double drive gate. The components consist of: 4- female gate hinges 2- drop rod guides 1- fork latch assembly 4- male post hinges 10- carriage bolts and nuts The J-bolt double drive gate set comes with 4- 5/8" x 4 1/2" J-bolts instead of 4-male post hinges. All components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
This unit bolts to a pipe to keep gate open. Please see additional information below for further details
-
Gate scrolls are decorative fittings attached to gates along the top gate railing. Please see additional information below for further details
-
Double truck wheel assemblies using 6” or 12” carriers and 6” solid rubber tires. Comes with everything to hang rolling gate except bolts, brace bands, and tubing.
Please see additional information below for further details019031 Rolling Gate Kit #1: 1-#017131-Double Wheel Gate Roller 6" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017571 Residential Clamp On Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch 019032 Rolling Gate Kit #1 with Universal Clamp on Holder: 1-#017131-Doubel Wheel Gate Roller 6" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017573 Universal Clamp on Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch 019033 Rolling Gate Kit #1 with 12" wide Double Wheel Carrier And 6" Solid Rubber Tire Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017571 Residential Clamp on Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch
