-
Pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Hinge is attached to the post with a strap and four carriage bolts. Carriage bolts and nuts are included. Please see additional information for further details
-
These are post fittings used to hold barbed wire in place. These arms are angled at 45º and hold three strands of barbed wire. These arms are foreign produced and are not rain-tight. Please see additional information for further details
-
Heavy pressed steel forks are 8 gauge x 1" fittings that along with gate collars form a fork latch assembly. The heavy fork comes in six sizes for post sizes ranging from 1 5/8" to 4". Sizes 3 1/2" and 4” are 8 gauge x 1 1/4" Please see additional information below for further details
-
Heavy pressed steel forks are 8 gauge x 1" fittings that along with gate collars form a fork latch assembly. The heavy fork comes in six sizes for post sizes ranging from 1 7/8" to 3". Please see additional information below for further details
-
Specialized pliers designed to crush pig rings for easy installation. Made of heavy gauge steel with set screw to prevent over-crushing of rings. Please see additional information below for further details
-
Double Gate Latches have slotted holes to be bolted to 1 5/8” or 1 7/8” gate frames. It eliminates the use of drop rod assembly. Please see additional information below for further details
-
Heavier gauge steel (11 gauge) used for commercial gate tubing in 1 5/8″ or 1 7/8″ sizes in a one-piece welded corner. Please see additional information below for further details
-
A commercial guide designed for drop rod assemblies. Sizes available are 1 5/8" and 1 7/8". Please see additional information below for further details
-
Heavier kit for commercial usage. Double truck is 12” carrier width, and uses 2 U-bolts for strength. Has everything needed to install except bands, bolts, and tubing.
Please see additional information below for further details019131-Rolling Gate Kit #2 w/ 6” Rubber Tire Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier w/ 6" Rubber Tire Wheels 2-#017231-5" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019132-Rolling Gate Kit #2 w/ 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier with 8" Rub. Tire Whls. 2-#017231-5" Gate Roller And Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling GateLatch 019133-Rolling Gate Kit #2 w/ 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/ 10" Rubber Tire Whls. 2-#017231-5" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019134-Rolling Gate Kit #2 w/ 7" Rear Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier w/ 6" Rubber Tire Whls. 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019135-Rolling Gate Kit #2 w/ 7 " Rear Wheels & 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier w/8" Rubber Tire Wheels 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019136-Rolling Gate Kit #2 w/ 7" Rear Wheels & 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/ 10" Rubber Tire Wheels 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch -
A commercial grade single gate latch with locking capability for enhanced security. Please see additional information below for further details
-
Bracket designed for inside corner applications. Made of 3/16” x 2” steel with 9 gauge strap with set screw. Does not have lip, so can be mounted on any flat surface. Please see additional information below for further details
-
Kennel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 12 gauge x 1 1/2" wide steel with approximately 3/4" spacing between the two pieces of tubing. They are most commonly used for dog kennels and similar applications. Carriage bolt and nut sold separately. Please see additional information for further details
-
Kennel hinges are a fitting that reduces the gap between the gate and panel compared to a male and female hinge combination. A 3/8" x 2" carriage bolt and nut is used. Carriage bolt and nut sold separately. 9 gauge. Please see additional information below for further details
-
A gate fitting commonly used on dog kennels for 1 3/8" kennel tubing. Please see additional information below for further details
-
14 gauge Line Rail Clamps are a two-piece clamp designed for 180° horizontal rail connections to a line post (also called boulevard clamp). 5/16” carriage bolt used. Carriage bolt and nut sold separately. Please see additional information for further details
