-
Universal pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Universal box hinges are attached to the post with a strap and four 3/8" carriage bolts. These hinges are universal because they fit post sizes 2 1/2" through 4 1/2". Bolts and nuts included. Please see additional information below for further details
-
Dual Top Plate is used to cover the top of the post. Universal Post Plate bracket is used to attach two post together, which allows horizontal rail to run through the center of your posts. Please see additional information below for further details
-
14 gauge flat bracket with holes at all four corners, designed to fit any post from 1 3/8" to 4 1/2" by using proper brace band for attachment. Design features smooth backside of post. Band, bolt and nut sold separately. Please see additional information below for further details
-
Latch assembly kit comes with everything needed to install latch on wood fence. ** Latches include (1) LATCH, (1) HANDLE, (1) STRIKER PIN, and POWDER COATED LAG SCREWS per plastic bag - 12 bags per box. Please see additional information below for further details
-
6" x 2" wide wheel designed for double front trucks using embedded angle channel for tracking of gates. Can be purchased installed on double front trucks. Call for availability. Please see additional information below for further details
-
Walk gate sets are a package of all necessary parts to install a single walk gate. The components consist of: 2 - female gate hinges 1 - fork latch assembly 2 - male post hinges 4 - carriage bolts and nuts The J-bolt walk gate set comes with 2 - 5/8" x 4 1/2" J-bolts instead of 2 - male post hinges. All the components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
Walk gate sets are a package of all necessary parts to install a single walk gate. The components consist of: 2 - female gate hinges 1 - fork latch assembly 2 - male post hinges 4 - carriage bolts and nuts The J-bolt walk gate set comes with 2 - 5/8" x 4 1/2" J-bolts instead of 2 - male post hinges. All the components are packaged in a clear poly bag. These kits are for 1 3/8" gate frames and either 1 7/8" or 2 3/8" male post hinges for gate posts or J-bolts. Please see additional information below for further details
-
12 gauge flat bracket designed for 1 3/8“ fork assemblies. Can be attached to any flat surface with 1/2" lags. Please see additional information below for further details
-
Weld on caps are fittings welded atop a post usually to exclude water from tubular posts. Please see additional information below for further details
-
Designed for corral panels, uses 9" corral pin for attachment. Weld on style. 9 gauge. Please see additional information below for further details
-
Weld on female 8 gauge steel hinge with 5/8" pinhole, makes a very strong hinge. Please see additional information below for further details
-
Weld on male 9 gauge steel hinge with 5/8" pin makes a very strong hinge. Please see additional information below for further details
-
Weld-On Post Hinge - Galvanized steel bracket designed to be welded or bolted on any flat surface. This is the male hinge in 5/8” size. Square Post Hinge - Galvanized male hinges designed to bolt on square tubing. These have 5/8” pins, using 3/8” bolts for attachment; not included. Please see additional information below for further details
-
Welded Wire Clamps are designed to attach welded wire panels to the post for support of your panels. Available in 1 5/8”, 1 7/8”, 2 3/8”, 2 7/8” and 4” sizes. Material is 11 gauge x 1. Please see additional information for further details
-
Welded Wire Clamps are designed to attach welded wire panels to the post for support of your panels. Available in 1 5/8”, 1 7/8”, 2 3/8”, 2 7/8” and 4” sizes. Material is 11 gauge x 1. Please see additional information for further details
