-
Also known as double front truck roller assemblies. Available with 6”, 8” and 10” Rubber Tire Wheels. Also either 6” or 12” wide carriers. Designed to support front of Rolling Gate Assembly. Can also fit 2 3/8" frame, please specify. Please see additional information below for further details
-
14 gauge brackets used when double-sided fence is required. Made from 14 gauge steel with 9 gauge strap for pipe attachment with set screw and lip. Please see additional information below for further details
-
Economical 12 gauge x 3/4" band attached to a 14 gauge flat wood adapter plate. Available in several sizes to fit most common posts. Please see additional information below for further details
-
Line tops are a cap or top with a loop used to position the top rail or tension wire on top of line posts (also called line post cap, eye top, loop cap, loop top). Please see additional information below for further details
-
14 gauge End Rail Clamps are a two-piece clamp designed for horizontal rail connections to an end post (also called gate brace clamp). Carriage bolt and nut sold separately. Please see additional information for further details
-
End of line wood adapter for attaching wood rails to steel posts. Made from 14 gauge steel with 9 gauge strap with set screw. Has 90º lip for wood rail support. Please see additional information below for further details
-
Heavy 3/16” x 2” steel bracket with 9 gauge strap with set screw designed to be used at the end of the line. Used same as above but without a lip so that you can attach it to any flat surface. Please see additional information below for further details
-
Designed to hold 3 strands of barb wire in place. These are domestically produced. We can also produce 250 lb. down pull arms. They have the same part number, but with a # sign. Please see additional information for further details
-
Designed to hold 6 strands of barbwire in place. These are domestically produced. We can also produce 250 lb. down pull arms. They have the same part number, but with a # sign. Please see additional information for further details
-
Designed to hold 3 strands of barb wire in place. These are 14 1/2" overall measured from top of loop to tip of arm, and are domestically produced. Please see additional information for further details
-
Fabric ties designed to attach chain link to rail tubing. Steel ties are available in 12 gauge with different lengths. Aluminum ties are available in 9 and 11 1/2 gauge with different lengths. Pig rings are 12 gauge steel and come in 10 lb. boxes. Please see additional information below for further details
-
Female gate hinges are a fitting that attaches to the gate frame and functions with the post hinge (also called frame hinge). A 3/8" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Stretchers designed for 2 3/8” and 2 7/8” tubing. These units facilitate installation of fabric to terminal post. Please see additional information below for further details
-
Steel plates to attach tubing to flat surfaces. These items are uncoated. Please see additional information below for further details
-
Specialized tool used to install special gate clips easily. Made from heavy steel for commercial duty with black rubber grips. Will only work on 1 3/8” or 1 5/8” special gate clips. Please see additional information below for further details
-
Pressed steel 5” or 7” roller assemblies with strap and bolt. Please see additional information below for further details
-
Gate roller brackets are designed to connect the gate roller to the gate for tracking purposes. They are available for 1 3/8”, 1 5/8” and 1 7/8” tubing sizes. Also in industrial and extended sizes for special uses. They can be bolted on with U-bolts or single bolts. Please see additional information below for further details
-
Fabric ties designed to attach chain link to rail tubing. Aluminum ties are available in 9ga. with different lengths. Black vinyl coated. Please see additional information below for further details
-
Cast aluminum caps for sealing pipes to prevent corrosion. Please see additional information below for further details
-
Aluminum corners designed to make 90º corners for gates. Please see additional information below for further details
-
Loop caps for line post designed to attach top rails. Also prevents moisture from attacking inner post. Please see additional information below for further details
-
Aluminum fitting to stop rail ends. Usually attached with brace bands. Please see additional information below for further details
-
12 gauge x 3/4" strip of metal shaped to fit around post to attach rail ends to that post. Can also be used to attach tighteners, brace rail ends or barbwire to post. A 5/16" x 1 1/2" carriage bolt and nut is included. Please see additional information below for further details
-
End rail clamps are a two-piece clamp designed for horizontal connections for rails. Also called gate brace clamps. Please see additional information below for further details
-
Female fitting that attaches to gate frame and functions with the post hinge. Comes with 3/8" bolt and nut. Please see additional information below for further details
-
Collars are attached to fork and post to form gate latch assembly. Please see additional information below for further details
-
Pressed steel fork used in conjunction with gate collars to make up latch assembly. Please see additional information below for further details
-
Gate scrolls are decorative fittings that attach to top rails of gates. Please see additional information below for further details
-
Male fitting that attaches to gatepost, and when used with female gate hinge, permit the gate to swing. Comes with bolt and nut. Please see additional information below for further details
-
Gate clip designed to be installed with special gate clip tool, to attach fence fabric to gate frame. Used on sides of gate frame in conjunction with tension bars. Please see additional information below for further details
-
14 gauge x 3/4" offset strip of metal shaped to fit around terminal posts. These come with 5/16" x 1 1/2" carriage bolt and nut. Please see additional information below for further details
-
Steel or aluminum gussets are used to weld in the corners of gates for the use of truss rods. Please see additional information below for further details
-
Pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Hinge is attached to the post with a strap and four carriage bolts. Carriage bolts and nuts are included. Please see additional information for further details
-
These are post fittings used to hold barbed wire in place. These arms are angled at 45º and hold three strands of barbed wire. These arms are foreign produced and are not rain-tight. Please see additional information for further details
-
Heavy pressed steel forks are 8 gauge x 1" fittings that along with gate collars form a fork latch assembly. The heavy fork comes in six sizes for post sizes ranging from 1 5/8" to 4". Sizes 3 1/2" and 4” are 8 gauge x 1 1/4" Please see additional information below for further details
-
Heavy pressed steel forks are 8 gauge x 1" fittings that along with gate collars form a fork latch assembly. The heavy fork comes in six sizes for post sizes ranging from 1 7/8" to 3". Please see additional information below for further details
-
Specialized pliers designed to crush pig rings for easy installation. Made of heavy gauge steel with set screw to prevent over-crushing of rings. Please see additional information below for further details
-
Double Gate Latches have slotted holes to be bolted to 1 5/8” or 1 7/8” gate frames. It eliminates the use of drop rod assembly. Please see additional information below for further details
-
Heavier gauge steel (11 gauge) used for commercial gate tubing in 1 5/8″ or 1 7/8″ sizes in a one-piece welded corner. Please see additional information below for further details
-
A commercial guide designed for drop rod assemblies. Sizes available are 1 5/8" and 1 7/8". Please see additional information below for further details
-
Heavier kit for commercial usage. Double truck is 12” carrier width, and uses 2 U-bolts for strength. Has everything needed to install except bands, bolts, and tubing.
Please see additional information below for further details019131-Rolling Gate Kit #2 w/ 6” Rubber Tire Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier w/ 6" Rubber Tire Wheels 2-#017231-5" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019132-Rolling Gate Kit #2 w/ 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier with 8" Rub. Tire Whls. 2-#017231-5" Gate Roller And Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling GateLatch 019133-Rolling Gate Kit #2 w/ 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/ 10" Rubber Tire Whls. 2-#017231-5" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019134-Rolling Gate Kit #2 w/ 7" Rear Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier w/ 6" Rubber Tire Whls. 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019135-Rolling Gate Kit #2 w/ 7 " Rear Wheels & 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier w/8" Rubber Tire Wheels 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019136-Rolling Gate Kit #2 w/ 7" Rear Wheels & 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/ 10" Rubber Tire Wheels 2-#017232-7" Gate Roller and Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017573-Universal Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch -
A commercial grade single gate latch with locking capability for enhanced security. Please see additional information below for further details
-
Bracket designed for inside corner applications. Made of 3/16” x 2” steel with 9 gauge strap with set screw. Does not have lip, so can be mounted on any flat surface. Please see additional information below for further details
-
Kennel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 12 gauge x 1 1/2" wide steel with approximately 3/4" spacing between the two pieces of tubing. They are most commonly used for dog kennels and similar applications. Carriage bolt and nut sold separately. Please see additional information for further details
-
Kennel hinges are a fitting that reduces the gap between the gate and panel compared to a male and female hinge combination. A 3/8" x 2" carriage bolt and nut is used. Carriage bolt and nut sold separately. 9 gauge. Please see additional information below for further details
-
A gate fitting commonly used on dog kennels for 1 3/8" kennel tubing. Please see additional information below for further details
-
14 gauge Line Rail Clamps are a two-piece clamp designed for 180° horizontal rail connections to a line post (also called boulevard clamp). 5/16” carriage bolt used. Carriage bolt and nut sold separately. Please see additional information for further details
