-
Latch assembly kit comes with everything needed to install latch on wood fence. ** Latches include (1) LATCH, (1) HANDLE, (1) STRIKER PIN, and POWDER COATED LAG SCREWS per plastic bag - 12 bags per box. Please see additional information below for further details
-
14 gauge flat bracket with holes at all four corners, designed to fit any post from 1 3/8" to 4 1/2" by using proper brace band for attachment. Design features smooth backside of post. Band, bolt and nut sold separately. Please see additional information below for further details
-
Dual Top Plate is used to cover the top of the post. Universal Post Plate bracket is used to attach two post together, which allows horizontal rail to run through the center of your posts. Please see additional information below for further details
-
Universal pressed steel box hinges are a swing gate hinge that permits the gate to swing 90º from the closed to the open position. Universal box hinges are attached to the post with a strap and four 3/8" carriage bolts. These hinges are universal because they fit post sizes 2 1/2" through 4 1/2". Bolts and nuts included. Please see additional information below for further details
-
Please see additional information below for further details
-
Two-way brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the two rail ends or two brace rail end and truss rod tighteners to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 12 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Sometimes called 180º bands. Please see additional information below for further details
-
Two-way brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the two rail ends or two brace rail end and truss rod tighteners to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 11 gauge x 1". This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Sometimes called 180º bands. Please see additional information below for further details
-
Truss rod tigteners are used to provide support to gate corner posts by way of truss rods that are attached to the tighteners and posts. Please see additional information below for further details
-
Top rail sleeves are fittings used to join two pieces of top rail when a swedged top rail is not used. Please see additional information below for further details
-
These arms are 16” in length welded to a 3” x 3” x ¼” plate and are designed to hold 3 strands of barb wire in place. They are designed to be installed to the top of a post or top of a wall and are domestically produced. Please see additional information for further details
-
Galvanized steel bars designed to pull fabric tight and to attach to tension bands. Available for 4’, 5’, and 6 ft. heights. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 14 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 13 gauge x 7/8" steel. This gauge band is used in medium duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 11 gauge x 1" steel. This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Designed to add height and 3-wire capability to any size T-post 1.01 - 1.50 weight. Can be manufactured to fit on either side of T-post. Please see additional information for further details
