-
Line wood adaptor for 2 3/8" steel posts. Bracket is 13ga. X 2" X 6", and strap is 13ga. X 7/8". Designed to use 2 - 5/16" X 1 3/4" carriage bolts (not included). Bracket has 4 holes for rail attachment. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 14 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 13 gauge x 7/8" steel. This gauge band is used in medium duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 11 gauge x 1" steel. This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 13 gauge x 7/8" steel. Square bands are used in applications where square posts are used such as ornamental fence. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 12 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 13 gauge x 7/8" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end truss and rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 11 gauge x 1" steel. This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 13 gauge x 7/8" steel. Square bands are used in applications where square posts are used such as ornamental fence. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Two-way brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the two rail ends or two brace rail end and truss rod tighteners to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 12 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Sometimes called 180º bands. Please see additional information below for further details
-
Two-way brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the two rail ends or two brace rail end and truss rod tighteners to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 11 gauge x 1". This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Sometimes called 180º bands. Please see additional information below for further details
-
13 gauge x 1" steel strip designed to mount signs to 2 3/8" steel post. This bracket comes with 2 - 5/16" x 1 1/4" carriage bolts and is an inexpensive sign bracket to install commercial signage. Please see additional information below for further details
-
Square PS caps (also called square post caps) fit atop a square post usually to prevent water from corroding inner post and for decorative purposes. Please see additional information below for further details
-
Weld on caps are fittings welded atop a post usually to exclude water from tubular posts. Please see additional information below for further details
-
Dual Top Plate is used to cover the top of the post. Universal Post Plate bracket is used to attach two post together, which allows horizontal rail to run through the center of your posts. Please see additional information below for further details
-
Line tops are a cap or top with a loop used to position the top rail or tension wire on top of line posts (also called line post cap, eye top, loop cap, loop top). Please see additional information below for further details
-
Offset rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post. Carriage bolt and nut sold separately. These have 1 hole and the tab is fastened to top of cup at a 45º. Combination rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail to a post in conjunction with connecting the truss rod. Carriage bolt & nut is sold separately. These have 2 holes for 3/8" truss rods and 45º tab having 1 hole. Brace rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post in conjunction with connecting the truss rod. Carriage bolts and nuts sold separately. Tab has 2 holes and is welded to cup parallel to the ground, there are no holes in the cup. Please see additional information below for further details
-
Top rail sleeves are fittings used to join two pieces of top rail when a swedged top rail is not used. Please see additional information below for further details
-
14 gauge Line Rail Clamps are a two-piece clamp designed for 180° horizontal rail connections to a line post (also called boulevard clamp). 5/16” carriage bolt used. Carriage bolt and nut sold separately. Please see additional information for further details
-
14 gauge End Rail Clamps are a two-piece clamp designed for horizontal rail connections to an end post (also called gate brace clamp). Carriage bolt and nut sold separately. Please see additional information for further details
-
11 gauge Square Line Rail Clamps are a two-piece clamp designed for 180° horizontal square rail connections to a square line post. Carriage bolt and nut sold separately. Please see additional information for further details
-
Panel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 8 gauge x 1 1/2" wide steel with approximately 1/2" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Saddle clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 7 gauge x 1" wide steel with approximately 1 1/4" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Kennel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 12 gauge x 1 1/2" wide steel with approximately 3/4" spacing between the two pieces of tubing. They are most commonly used for dog kennels and similar applications. Carriage bolt and nut sold separately. Please see additional information for further details
-
Welded Wire Panel Clamps are designed to join 2 welded wire panels together where you do not have a post. Material is 11 gauge x 1. Please see additional information for further details
-
Welded Wire Clamps are designed to attach welded wire panels to the post for support of your panels. Available in 1 5/8”, 1 7/8”, 2 3/8”, 2 7/8” and 4” sizes. Material is 11 gauge x 1. Please see additional information for further details
-
Square Welded Wire Clamps are designed to attach welded wire panels to a square post for support of your panels. Material is 11 gauge x 1. Please see additional information for further details
-
Three wire clamp-on barbed wire extension arms are made of pressed steel and are attached to the post with brace bands. These arms are 18" long and 14 gauge. Please see additional information for further details
-
These are post fittings used to hold barbed wire in place. These arms are angled at 45º and hold three strands of barbed wire. These arms are foreign produced and are not rain-tight. Please see additional information for further details
-
Designed to add height and 3-wire capability to any size T-post 1.01 - 1.50 weight. Can be manufactured to fit on either side of T-post. Please see additional information for further details
