-
Line wood adaptor for 2 3/8" steel posts. Bracket is 13ga. X 2" X 6", and strap is 13ga. X 7/8". Designed to use 2 - 5/16" X 1 3/4" carriage bolts (not included). Bracket has 4 holes for rail attachment. Please see additional information below for further details
-
One piece corner arms designed for 3-wire barb standoffs made from malleable steel. Please see additional information below for further details
-
Available in many sizes and attaches with a bent bolt. Very popular clean looking installation. Please see additional information below for further details
-
Cast iron or semi-steel post or dome caps available in many sizes Please see additional information below for further details
-
Aluminum corners designed to make 90º corners for gates. Please see additional information below for further details
-
Aluminum fitting to stop rail ends. Usually attached with brace bands. Please see additional information below for further details
-
Loop caps for line post designed to attach top rails. Also prevents moisture from attacking inner post. Please see additional information below for further details
-
Cast aluminum caps for sealing pipes to prevent corrosion. Please see additional information below for further details
-
Fabric ties designed to attach chain link to rail tubing. Aluminum ties are available in 9ga. with different lengths. Black vinyl coated. Please see additional information below for further details
-
Pressed steel fork used in conjunction with gate collars to make up latch assembly. Please see additional information below for further details
-
Collars are attached to fork and post to form gate latch assembly. Please see additional information below for further details
-
Gate scrolls are decorative fittings that attach to top rails of gates. Please see additional information below for further details
-
Gate clip designed to be installed with special gate clip tool, to attach fence fabric to gate frame. Used on sides of gate frame in conjunction with tension bars. Please see additional information below for further details
-
Male fitting that attaches to gatepost, and when used with female gate hinge, permit the gate to swing. Comes with bolt and nut. Please see additional information below for further details
-
Female fitting that attaches to gate frame and functions with the post hinge. Comes with 3/8" bolt and nut. Please see additional information below for further details
-
End rail clamps are a two-piece clamp designed for horizontal connections for rails. Also called gate brace clamps. Please see additional information below for further details
-
12 gauge x 3/4" strip of metal shaped to fit around post to attach rail ends to that post. Can also be used to attach tighteners, brace rail ends or barbwire to post. A 5/16" x 1 1/2" carriage bolt and nut is included. Please see additional information below for further details
-
14 gauge x 3/4" offset strip of metal shaped to fit around terminal posts. These come with 5/16" x 1 1/2" carriage bolt and nut. Please see additional information below for further details
-
Aluminum corners designed to make 90º corners for gates. Please see additional information below for further details
-
Aluminum fitting to stop rail ends. Usually attached with brace bands. Please see additional information below for further details
-
Loop caps for line posts designed to attach top rails. Also prevents moisture from attacking inner post. Please see additional information below for further details
-
Fabric ties designed to attach chain link to rail tubing. Aluminum ties are available in 9ga with different lengths. Black vinyl coated. Please see additional information below for further details
-
Pressed steel fork used in conjunction with gate collars to make up latch assembly. Please see additional information below for further details
-
Collars are attached to fork and post to form gate latch assembly. Please see additional information below for further details
-
Gate scrolls are decorative fittings that attach to top rails of gates. Please see additional information below for further details
-
Gate clip designed to be installed with special gate clip tool, to attach fence fabric to gate frame. Used on sides of gate frame in conjunction with tension bars. Please see additional information below for further details
-
Male fitting that attaches to gatepost, and when used with female gate hinge, permit the gate to swing. Comes with bolt and nut. Please see additional information below for further details
-
Female fitting that attaches to gate frame and functions with the post hinge. Comes with 3/8" bolt and nut. Please see additional information below for further details
-
End rail clamps are a two-piece clamp designed for horizontal connections for rails. Also called gate brace clamps. Please see additional information below for further details
-
12 gauge x 3/4" strip of metal shaped to fit around post to attach rail ends to that post. Can also be used to attach tighteners, brace rail ends or barbwire to post. A 5/16" x 1 1/2" carriage bolt and nut is included. Please see additional information below for further details
-
14 gauge x 3/4" offset strip of metal shaped to fit around terminal posts. These come with 5/16" x 1 1/2" carriage bolt and nut. Please see additional information below for further details
-
Welded Wire Clamps are designed to attach welded wire panels to the post for support of your panels. Available in 1 5/8”, 1 7/8”, 2 3/8”, 2 7/8” and 4” sizes. Material is 11 gauge x 1. Please see additional information for further details
-
Galvanized steel square forks to be used in conjunction with square collars above. Please see additional information below for further details
-
8 gauge x 1 1/4" wide galvanized collars for square tubing. Designed to hang square forks on square tubing. Please see additional information below for further details
-
Weld-On Post Hinge - Galvanized steel bracket designed to be welded or bolted on any flat surface. This is the male hinge in 5/8” size. Square Post Hinge - Galvanized male hinges designed to bolt on square tubing. These have 5/8” pins, using 3/8” bolts for attachment; not included. Please see additional information below for further details
-
Female hinge designed to fit on square tubing. Uses 3/8” bolts not included. 9 gauge material. Please see additional information below for further details
-
Galvanized bands made from 13 gauge x 7/8” steel for square tubing. Please see additional information below for further details
-
11 gauge Square Line Rail Clamps are a two-piece clamp designed for 180° horizontal square rail connections to a square line post. Carriage bolt and nut sold separately. Please see additional information for further details
-
Galvanized bands designed for square tubing. Designed to pull fabric and attach to square tubing. 13 gauge x 7/8” for strength. Please see additional information below for further details
-
Spring loaded closure designed to work in either direction. Please see additional information below for further details
-
Solid corner for a clean corner on gate assemblies. Also available in split design. Please see additional information below for further details
-
Offset rail end brackets designed to stop top rails. To be used with brace bands. Please see additional information below for further details
-
Loop caps designed for either 1 3/8” or 1 5/8” top rails. Please see additional information below for further details
-
Plain, one way, and two-way caps designed to finish fence installations. Designed to accept standard top rail where needed. Concave adapters used to attach top rails by bolting on either side of smooth bullet tops to make 1-way or 2-way bullet tops. Please see additional information below for further details
-
Plugs designed for drive-in fitting. Please see additional information below for further details
-
Cast aluminum caps for sealing pipe to prevent corrosion. Please see additional information below for further details
-
6" x 2" wide wheel designed for double front trucks using embedded angle channel for tracking of gates. Can be purchased installed on double front trucks. Call for availability. Please see additional information below for further details
-
Poly guards designed to fit over cantilever rollers for safety. Please see additional information below for further details
