-
Fabric ties designed to attach chain link to rail tubing. Steel ties are available in 12 gauge with different lengths. Aluminum ties are available in 9 and 11 1/2 gauge with different lengths. Pig rings are 12 gauge steel and come in 10 lb. boxes. Please see additional information below for further details
-
Fabric ties designed to attach chain link to rail tubing. Aluminum ties are available in 9ga with different lengths. Black vinyl coated. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end truss and rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 11 gauge x 1" steel. This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Two-way brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the two rail ends or two brace rail end and truss rod tighteners to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 11 gauge x 1". This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Sometimes called 180º bands. Please see additional information below for further details
-
Welded Wire Clamps are designed to attach welded wire panels to the post for support of your panels. Available in 1 5/8”, 1 7/8”, 2 3/8”, 2 7/8” and 4” sizes. Material is 11 gauge x 1. Please see additional information for further details
-
14 gauge steel-ell bracket with 9 gauge strap with set screw. Designed to screw onto wood rail and be supported by steel fence post. Very popular item to run wood fencing using steel posts. Please see additional information below for further details
-
Designed to hold 6 strands of barbwire in place. These are domestically produced. We can also produce 250 lb. down pull arms. They have the same part number, but with a # sign. Please see additional information for further details
-
Cast aluminum caps for sealing pipe to prevent corrosion. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 13 gauge x 7/8" steel. Square bands are used in applications where square posts are used such as ornamental fence. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Welded Wire Panel Clamps are designed to join 2 welded wire panels together where you do not have a post. Material is 11 gauge x 1. Please see additional information for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 12 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Offset rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post. Carriage bolt and nut sold separately. These have 1 hole and the tab is fastened to top of cup at a 45º. Combination rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail to a post in conjunction with connecting the truss rod. Carriage bolt & nut is sold separately. These have 2 holes for 3/8" truss rods and 45º tab having 1 hole. Brace rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post in conjunction with connecting the truss rod. Carriage bolts and nuts sold separately. Tab has 2 holes and is welded to cup parallel to the ground, there are no holes in the cup. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 14 gauge x 3/4" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Saddle clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 7 gauge x 1" wide steel with approximately 1 1/4" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 11 gauge x 1" steel. This gauge band is used in heavy-duty commercial applications. A 3/8" x 1 1/2" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Female gate hinges are a fitting that attaches to the gate frame and functions with the post hinge (also called frame hinge). Square female gate hinges are used in applications where square gate frames are used such as ornamental fence. A 3/8" carriage bolt is used. Carriage bolt and nut sold separately. 8 gauge. Please see additional information below for further details
-
Panel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 8 gauge x 1 1/2" wide steel with approximately 1/2" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Galvanized steel bars designed to pull fabric tight and to attach to tension bands. Available for 4’, 5’, and 6 ft. heights. Please see additional information below for further details
-
Tension bands are an offset strip of metal shaped to fit around the terminal post and used with a carriage bolt and nut to attach the tension bar to the post. These bands are made from 13 gauge x 7/8" steel. This gauge band is used in medium duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Female fitting that attaches to gate frame and functions with the post hinge. Comes with 3/8" bolt and nut. Please see additional information below for further details
-
14 gauge Line Rail Clamps are a two-piece clamp designed for 180° horizontal rail connections to a line post (also called boulevard clamp). 5/16” carriage bolt used. Carriage bolt and nut sold separately. Please see additional information for further details
-
Aluminum fitting to stop rail ends. Usually attached with brace bands. Please see additional information below for further details
-
Loop caps for line posts designed to attach top rails. Also prevents moisture from attacking inner post. Please see additional information below for further details
-
14 gauge x 3/4" offset strip of metal shaped to fit around terminal posts. These come with 5/16" x 1 1/2" carriage bolt and nut. Please see additional information below for further details
-
Gate clip designed to be installed with special gate clip tool, to attach fence fabric to gate frame. Used on sides of gate frame in conjunction with tension bars. Please see additional information below for further details
-
Male fitting that attaches to gatepost, and when used with female gate hinge, permit the gate to swing. Comes with bolt and nut. Please see additional information below for further details
-
Post hinges are a fitting that attaches to the gatepost, the pintle of which fits the frame hinge permitting the gate to swing (also called male hinge). These hinges are made from 8 gauge x 1" wide steel. A 3/8" x 1 1/2" through 3 1/2" carriage bolt is used. Carriage bolt and nut are sold separately. Please see additional information below for further details
-
These are post fittings used to hold barbed wire in place. These arms are angled at 45º and hold three strands of barbed wire. These arms are foreign produced and are not rain-tight. Please see additional information for further details
-
Heavy 3/16” x 2” bracket with 9 gauge strap with set screws. Differs from above due to thicker steel and no lip; so can be mounted anywhere on flat surface. Please see additional information below for further details
-
Offset rail end brackets designed to stop top rails. To be used with brace bands. Please see additional information below for further details
-
14 gauge pressed steel bracket designed to hold rails when building fence using T-post. Has lip on bottom and set screw digs into “T” on post for secure fastening. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 13 gauge x 7/8" steel. Square bands are used in applications where square posts are used such as ornamental fence. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Galvanized bands designed for square tubing. Designed to pull fabric and attach to square tubing. 13 gauge x 7/8” for strength. Please see additional information below for further details
-
These arms are 16” in length welded to a 3” x 3” x ¼” plate and are designed to hold 3 strands of barb wire in place. They are designed to be installed to the top of a post or top of a wall and are domestically produced. Please see additional information for further details
-
Designed to hold 3 strands of barb wire in place. These are domestically produced. We can also produce 250 lb. down pull arms. They have the same part number, but with a # sign. Please see additional information for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 13 gauge x 7/8" steel. This gauge band is used in residential and other light duty applications. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
12 gauge x 3/4" strip of metal shaped to fit around post to attach rail ends to that post. Can also be used to attach tighteners, brace rail ends or barbwire to post. A 5/16" x 1 1/2" carriage bolt and nut is included. Please see additional information below for further details
-
Top rail sleeves are fittings used to join two pieces of top rail when a swedged top rail is not used. Please see additional information below for further details
-
Weld on caps are fittings welded atop a post usually to exclude water from tubular posts. Please see additional information below for further details
-
Post hinges are a fitting that attaches to the gatepost, the pintle of which fits the frame hinge permitting the gate to swing. These hinges are made from 8 gauge x 1 1/4" wide or 8 gauge x 1 1/2" wide steel. A 3/8" x 2" through 3 1/2" carriage bolt and nut are used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
12 gauge x 3/4" 2 piece strap steel clamp designed to join two pipes at 90º angles. Used mainly in the construction of greenhouses, but can also be used to build portable buildings and for many other uses. Strap steel which is twisted and galvanized, are sold without bolts. Please see additional information below for further details
-
Designed to add height and 3-wire capability to any size T-post 1.01 - 1.50 weight. Can be manufactured to fit on either side of T-post. Please see additional information for further details
-
These arms are 18” in length welded to a 3” x 3” x ¼” plate and are designed to hold 3 strands of barb wire in place. They are designed to be installed to the side of a post or side of a wall and are domestically produced. Please see additional information for further details
-
Plugs designed for drive-in fitting. Please see additional information below for further details
-
Square post hinges are a fitting that attaches to the gate post, the pintle of which fits the frame hinge permitting the gate to swing. A 3/8" x 1 1/2" through 4 1/2" carriage bolt and nut is used. Carriage bolt and nut sold separately. 9 gauge. Please see additional information below for further details
-
Designed to hold 3 strands of barb wire in place. These are 14 1/2" overall measured from top of loop to tip of arm, and are domestically produced. Please see additional information for further details
