-
Female gate hinges are a fitting that attaches to the gate frame and functions with the post hinge (also called frame hinge). Square female gate hinges are used in applications where square gate frames are used such as ornamental fence. A 3/8" carriage bolt is used. Carriage bolt and nut sold separately. 8 gauge. Please see additional information below for further details
-
Female hinge designed to fit on square tubing. Uses 3/8” bolts not included. 9 gauge material. Please see additional information below for further details
-
Galvanized bands made from 13 gauge x 7/8” steel for square tubing. Please see additional information below for further details
-
Brace bands are a symmetrically formed strip of metal shaped to fit around a post and used with a carriage bolt and nut to attach the rail end or brace rail end and truss rod tightener to the post. Also used for attaching barbed wire, tension wire, and other items to a terminal post. These bands are made from 13 gauge x 7/8" steel. Square bands are used in applications where square posts are used such as ornamental fence. A 5/16" x 1 1/4" carriage bolt is used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Items sold separately. Can be used to mount on wall, wood post or pipe. Please see additional information below for further details
-
Split kennel hinges are a fitting that one half of the hinge allows the kennel gate frame to swing while the other half attaches to the kennel panel. Two 3/8" x 1 1/2" carriage bolts and nuts are used. Carriage bolts and nuts are sold separately. 8 gauge x 1 1/2" material. Please see additional information below for further details
-
Pressed steel single wheel roller assemblies with either 6” or 8” rubber wheels. Available for 1 5/8” or 1 7/8” tubing Please see additional information below for further details
-
Cantilever latches are used on 2” gate frame and 3”, 4”, and 6 5/8” terminal post sizes. Please see additional information below for further details
-
13 gauge x 1" steel strip designed to mount signs to 2 3/8" steel post. This bracket comes with 2 - 5/16" x 1 1/4" carriage bolts and is an inexpensive sign bracket to install commercial signage. Please see additional information below for further details
-
These arms are 18” in length welded to a 3” x 3” x ¼” plate and are designed to hold 3 strands of barb wire in place. They are designed to be installed to the side of a post or side of a wall and are domestically produced. Please see additional information for further details
-
Cast iron or semi-steel post or dome caps available in many sizes Please see additional information below for further details
-
Available in one or two hole configuration, brace has two holes and the combo has one hole. Please see additional information below for further details
-
Heavier kit for commercial usage. Double truck is 12” carrier width, and uses 2 U-bolts for strength. Has everything needed to install except bands, bolts, and tubing.
Please see additional information below for further details019231-Rolling Gate Kit #3 w/ 6” Rubber Tire Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier w/6" Rubber Tire Wheel 2-#017331-5" Safety-type Gate Roller & Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017574-Safety-type Univ. Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019232-Rolling Gate Kit #3 w/ 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier w/8" Rub. Tire Wheel 2-#017331-5" Safety-type Gate Roller & Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket6-#017574-Safety-type Univ. Clamp on Hlder 1-#017603-1 5/8” or 1 7/8’ Rolling Gate Latch 019233-Rolling Gate Kit #3 w/ 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/10" Rubber Tire Wheel 2-#017331-7" Safety-type Gate Roller & Axle 2-#017402-1 5/8’ Gate Roller Bracket 2-#017403-1 7/8’ Gate Roller Bracket 6-#017574-Safety-type Univ. Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019235-Rolling Gate Kit #3 w/ 7" Rear Wheels & 8" Rubber Tire Wheels: 1-#017152-Double Wheel Gate Roller 12" Wide Carrier w/8" Rub. Tire Wheel 2-#017332-7" Safety-type Gate Roller & Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017574-Safety-type Univ. Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019236-Rolling Gate Kit #3 w/ 7" Rear Wheels & 10" Rubber Tire Wheels: 1-#017153-Double Wheel Gate Roller 12" Wide Carrier w/ 10" Fully Rubber Tire Wheels 2-#017332-7" Safety-type Gate Roller & Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017574-Safety-type Univ. Clamp on Holder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch 019237-Rolling Gate Kit #3 w/ 6" Wide Dbl. Wheel Carrier & 6" Rubber Tire Wheels: 1-#017131-Double Wheel Gate Roller 6" Wide Carrier w/ 6" Rub. Tire Wheels 2-#017331-5" Safety-type Gate Roller & Axle 2-#017402-1 5/8” Gate Roller Bracket 2-#017403-1 7/8” Gate Roller Bracket 6-#017574-Safety-type Univ. Clamp on Hlder 1-#017603-1 5/8” or 1 7/8” Rolling Gate Latch -
1 5/8" wide roller and axle assemblies available in 5” or 7” diameters. Some are with industrial brackets and some come with out. Safety straps are designed to prevent gate from coming off the track. Also available with 4" black nylon roller for heavy-duty usage with less drag. Axle lengths vary. Please see additional information below for further details
-
Saddle clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 7 gauge x 1" wide steel with approximately 1 1/4" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Latch assembly for rolling gates. Can be used on 1 5/8” or 1 7/8” gate frame. Please see additional information below for further details
-
Double truck wheel assemblies using 6” or 12” carriers and 6” solid rubber tires. Comes with everything to hang rolling gate except bolts, brace bands, and tubing.
Please see additional information below for further details019031 Rolling Gate Kit #1: 1-#017131-Double Wheel Gate Roller 6" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017571 Residential Clamp On Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch 019032 Rolling Gate Kit #1 with Universal Clamp on Holder: 1-#017131-Doubel Wheel Gate Roller 6" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017573 Universal Clamp on Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch 019033 Rolling Gate Kit #1 with 12" wide Double Wheel Carrier And 6" Solid Rubber Tire Wheels: 1-#017151-Double Wheel Gate Roller 12" Wide Carrier with 6" Rubber Tire Wheels 2-#017231 5" Gate Roller and Axle 2-#017402 1 5/8 Gate Roller Bracket 2-#017403 1 7/8 Gate Roller Bracket 6-#017571 Residential Clamp on Holder 1-#017603 1 5/8 or 1 7/8 Rolling Gate Latch -
Gate corner bottom and top fittings are used to connect 1 3/8" gate tubing together to form a residential gate. Please see additional information below for further details
-
Components that form a double gate latch assembly consisting of a drop rod, and drop rod guide. Items sold separately. Please see additional information below for further details
-
1 5/8” roller assembly with U-bolt for 2 7/8” tubing. Can also make for 2 3/8” and 4”. Designed for light residential use. Uses a pressed steel roller and has sealed bearing assemblies. Please see additional information below for further details
-
A fitting normally used in residential jobs to hold the gate in place when closed. Sizes available are for a 1 3/8" gate post for collar attachment and three sizes for the regular forks to close to: 1 3/8" 1 7/8" 2 3/8" Please see additional information below for further details
-
Regular pressed steel forks are 8 gauge x 3/4" fittings that along with gate collars form a fork latch assembly. These forks come in three sizes: 1 3/8" 1 7/8" 2 3/8" Please see additional information below for further details
-
Post hinges are a fitting that attaches to the gatepost, the pintle of which fits the frame hinge permitting the gate to swing (also called male hinge). These hinges are made from 8 gauge x 1" wide steel. A 3/8" x 1 1/2" through 3 1/2" carriage bolt is used. Carriage bolt and nut are sold separately. Please see additional information below for further details
-
Offset rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post. Carriage bolt and nut sold separately. These have 1 hole and the tab is fastened to top of cup at a 45º. Combination rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail to a post in conjunction with connecting the truss rod. Carriage bolt & nut is sold separately. These have 2 holes for 3/8" truss rods and 45º tab having 1 hole. Brace rail ends are a cup-shaped fitting used with a brace band, carriage bolt and nut to connect the top rail or brace to a post in conjunction with connecting the truss rod. Carriage bolts and nuts sold separately. Tab has 2 holes and is welded to cup parallel to the ground, there are no holes in the cup. Please see additional information below for further details
-
Pressed steel barbed wire V-type corner arms are a post fitting used to hold barbed wire in place. These arms are "V" shaped and hold 6 strands of barbed wire. Please see additional information for further details
-
Pressed steel 180º gate hinges are a swing gate hinge that permits the gate to swing 180º from the closed to the open position. Please see additional information for further details
-
Gate scrolls are decorative fittings attached to gates along the top gate railing. Please see additional information below for further details
-
This unit bolts to a pipe to keep gate open. Please see additional information below for further details
-
Gate clips are 12 gauge steel fittings used to attach gate fabric to the vertical sides of a gate frame. Please see additional information below for further details
-
Steel trough with 12” flat spike for ground anchoring. Designed to accept gate drop rods. Please see additional information below for further details
-
Steel plates designed for attaching tubing to flat surfaces. Available in many other sizes, call for availability. Please see additional information below for further details
-
6" x 6" x 1/4" steel flanges with 5/8" holes at each corner. Has 5 1/4" tall flange with 2 set screws to secure tubing. Available for 2", 2 1/2", 3" tubing. The 4” tubing is on a 8x8x1/4” plate. Our galvanized flanges are 1/4" thick. Used for many job start scenarios involving anchoring steel tubing to flat surfaces. Please see additional information below for further details
-
Gate collars are attached to a gate fork and post with carriage bolts to form a gate latch assembly. The collars are made of 8 gauge steel and come in three sizes to fit various post sizes such as: 1 3/8" 1 5/8" 1 7/8" Please see additional information below for further details
-
A gate fitting used to hold a gate in place when closed. Used on 1 3/8” gate frame with two fork sizes of 1 7/8" & 2 3/8". Has padlock hole under latch to secure gate. Please see additional information below for further details
-
Pressed steel barbed wire corner arms are a post fitting used to hold barbed wire in place. These arms are angled at 45º and hold three strands of barbed wire. Please see additional information for further details
-
Post hinges are a fitting that attaches to the gatepost, the pintle of which fits the frame hinge permitting the gate to swing. These hinges are made from 8 gauge x 1 1/4" wide or 8 gauge x 1 1/2" wide steel. A 3/8" x 2" through 3 1/2" carriage bolt and nut are used. Carriage bolt and nut sold separately. Please see additional information below for further details
-
Steel bracket to attach a round post to the side of a wall. Please see additional information below for further details
-
12 gauge x 3/4" 2 piece strap steel clamp designed to join two pipes at 90º angles. Used mainly in the construction of greenhouses, but can also be used to build portable buildings and for many other uses. Strap steel which is twisted and galvanized, are sold without bolts. Please see additional information below for further details
-
Panel clamps are a two-piece clamp designed to secure prefabricated panels on freestanding enclosures. These clamps are made from 8 gauge x 1 1/2" wide steel with approximately 1/2" spacing between the two pieces of tubing. Carriage bolt and nut sold separately. Please see additional information for further details
-
Heavy 3/16” x 2” steel bracket with 9 gauge strap with set screw. Similar to inside corner wood fence adapter but to be used for outside installation. Does not have lip, so it can be mounted on any flat surface. Please see additional information below for further details
-
Also commonly known as a duckbill, this unit bolts to pipe to keep gate open. Please see additional information below for further details
-
Malleable gate rest. Please see additional information below for further details
-
One-piece base with open bottom with four-corner bolt flange. Also has set screws for pipe security. Please see additional information below for further details
-
Available in many sizes and attaches with a bent bolt. Very popular clean looking installation. Please see additional information below for further details
-
One piece corner arms designed for 3-wire barb standoffs made from malleable steel. Please see additional information below for further details
-
Bracket designed for baseball backstops allowing angled top pipes for containment. Please see additional information below for further details
-
90º hinge assembly designed to fit 1 5/8” or 1 7/8” gate frame. Please see additional information below for further details
-
Available in sizes that our deluxe unit is not available in. Hub is pressed steel with 4 – ½” x 2 ½” carriage bolts. Comes with 1 1/8” shaft and grease fitting. * Deluxe rollers have needle bearings. Please see additional information below for further details
